Anycubic to Launch $169 Photon Zero SLA Printer

Anycubic is set to offer its brand-new Anycubic Photon Zero MSLA 3D printer at a very competitive price of $169. It sounds cheap, but will it be cheerful? Here’s what we know so far.

It is the time when you can see a 3D printer as usual as you can see a garage. People across the globe have came to know about the 3D printer and 3D printing. It is fascinating to use this technology at home. Many manufacturers have started manufacturing small 3D printers. These are easy to use, budget friendly, and one can find best 3D printer at lower costs also. There are many 3D printer manufacturing companies are there in the market. One of them is Anycubic. This is widely known for its products.

It is an Shenzhen-based manufacturer of the i3 Mega and Photon 3D printers (plus myriad others). These are their famous products. They has seen its fair share of success. Certainly, these two printers, in particular, are well regarded in the All3DP office, picking up our gongs for the “Best 3D Printer under $300” and “Best Budget Resin 3D Printer ” in the summer of 2019.

The Photon, in particular, stood top of the pile for a significant stretch of time as the best budget desktop resin printer, but with more competition entering the marketplace (such as the Photon’s usurper, the Elegoo Mars), Anycubic is reacting with a race to the bottom with the Anycubic Photon Zero, which will launch with a scintillatingly low price of $169.

According to the Anycubic, the first 100 customers to buy directly from its official store online will only pay $99. Not so fast though – the printer isn’t available yet.

So what’s different about the Photon Zero? How is Anycubic squeezing the price down? We’ll try to answer this with an in-depth look at the specifications. Here’s all we currently know about the Anycubic Photon Zero.

Eye-catcher:- it’s features

Perhaps the most noticeable difference between the original Photon and the new Photon Zero will be the size of the print bed. The Photon touts a build volume of 115 x 65 x 155 mm, whereas the Photon Zero only offers up 97 x 54 x 150 mm. If you’re coming to the Zero from a fused deposition modeling (FDM) printer, this build volume may sound ridiculously small, but for a budget MSLA machine, this is relatively ordinary.


Anycubic boasts a combination of linear rail and lead screw for stable and accurate Z-axis motion. Linear rails are becoming pretty standard fare on low-cost desktop resin printers, so to see it stick around in an overtly cheaper machine is nice. This should result in smoother vertical movement and result in better prints. It would also appear that the Anycubic Photon Zero benefits from an upgraded UV lighting module, although we’ve seen no further details to comment on this.

Another simple yet effective feature: Thanks to markings in the resin vat, you can now see the amount of material you have left – something missing from previous Photon models.


Anycubic has updated its Photon Workshop software to version 2.1.20. A huge step up in terms of functionality over the Photon Workshop that shipped with the original Photon (and even last year’s Photon S), the new software offers a number of essential resin print preparation tools. According to Anycubic, an 80 MB file now slices in just 32 seconds instead of several minutes.


Sounds too good to be true, doesn’t it? Well, a saving had to be made somewhere to squeak that price down, and it would appear that the masking LCD screen is the component that has been hit with the budget stick.

When compared to older Photon models, that slightly smaller build volume of the Photon Zero is underpinned by an even smaller masking screen packing a diminutive resolution of 480 x 854 pixels. As such, the X/Y resolution takes a hit, increasing to a pixel size of 115 microns – more than four times the size of the Photon’s 47-micron pixel size.

We’ve yet to see prints first hand but can only wonder how noticeable the difference is. Aggressive 16x anti-aliasing within the Photon Workshop software should alleviate the dip in quality, but we can only speculate as to how much.


Technology: LCD
Type: Resin
Year: 2020
Assembly: Fully assembled
Manufacturer: Anycubic
Country: China
Build Volume: 97 x 54 x 150 mm (3.81 x 2.12 x 5.9 in)
Layer Height: 10+ microns
XY Resolution: 0.115 mm (480 x 854 pixels)
Z-axis positioning accuracy: 0.01 mm
Printing Speed: 30 mm/h
Bed-Leveling: n/a
Display: Touchscreen
Third-Party Materials: Yes
Materials: 405 nm UV resin
Recommended Slicer: Photon Workshop (2.1.20)
Operating system: Windows / Mac OSX
File types: STL
Connectivity: USB
Frame dimensions: 180 x 195 x 367 mm (7.08 x 7.76 x 14.44 in)
Boxed size: n/a
Weight (packed): n/a

Leave a Reply

Your email address will not be published. Required fields are marked *